42 S&C Instruction Sheet 1072-530
SpeedNet Client Tool
Interfaces Window,
Serial Port Tab
Figure 69. Serial Port interface configuration window.
The
Serial Port
tab is only available when
DNP
is selected as the serial port mode. As
shown in Figure 69, the
Serial Port
tab is used to confi gure the communication parameters
for the SpeedNet Radio’s serial port. The following parameters can be confi gured:
• Baud Rate
—Determines the bit rate used for serial communications; the default
value is 9600
• Data Bits
—Determines the number of data bits within each character; the default
value is 8
• Parity
—Determines the setting for the parity bit within each character; the default
value is none
• Stop Bits
—Determines the number of stop bits that follow each character; the default
value is 1
• Flow Control
—Confi gures the type of fl ow control that is used for serial data
communication; the default value is none
