background image

S&C 5800 Series Automatic Switch Controls With

IntelliTeam

®

 II Automatic Restoration System

Instruction Sheet  1042-511

© S&C Electric Company 2003-2018, all rights reserved

January 22, 2018

Installation

Table of Contents

Section Page

Section Page

Introduction

Qualified Persons   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Read this Instruction Sheet    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Retain this Instruction Sheet    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Proper Application   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2 
Special Warranty Provision    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Safety Information

Understanding Safety-Alert Messages    .  .  .  .  .  .  .  .  .  .  .  .  . 4
Following Safety Instructions   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Replacement Instructions and Labels   .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Installation

Applicable Software   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Planning the IntelliTeam II System   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Suggested Team Setup Procedure    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6

IntelliTeam II System Setup   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10
Pre-Installation Checklist   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Optional In-Shop Setup   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Installing the Control    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16
Connecting the Battery    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20
Checking Input Connections    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 22
Adding Ac Power and Testing    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 23
Checking Communication Equipment   .  .  .  .  .  .  .  .  .  .  .  .  . 26
Local/Non-Automatic Service    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26

Installation Diagrams

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 27

Содержание 5800 Series







































Отзывы: