manualshive.com logo in svg
background image

TY-JS-220308-001

5

DANGER

Failure to take safety measures will result in death or serious

personal injury.

Notice

Operation Guideline

Transport and

installation

The equipment must be firmly fixed during transport and
installation. Otherwise, there will be a danger of tipping or
falling.

Electrical protection

The power cable terminal must be equipped with the electric
leakage and overload protection device according to the
rated current indicated on the equipment nameplate.

Stop running in

abnormal state

When the equipment is abnormal, as long as the cause is
not clear, it is forbidden to start. Otherwise, there is a danger
of damage, electric shock, fire, and injury.

Do not put fingers or

other things into the gap

of the equipment

There are rotating parts inside the device. Do not put fingers
or other things into the gap of the equipment. Otherwise, it
will cause personal injury.

Refrigerant leakage

a) When the refrigerant leaks, please make sure that the
ventilation is available. Otherwise, it may cause anesthesia
and suffocation if a large amount of refrigerant fills the
enclosed space;
b) Avoid contacting with skin, or it will cause frostbite.

DANGER

Failure to take safety measures will result in minor personal

injury or property damage.

Notice

Operation Guideline

Transportation with

liquid is prohibited

The equipment is not allowed to be transported with liquid to
prevent internal pipeline leakage.

Transport

a) The equipment should be fixed firmly before transportation
to prevent the equipment from moving due to vibration and
external forces. If there is excessive vibration and external
force, the internal equipment may be damaged.
b) Tilt angle should be ≤45°.Otherwise, the refrigeration
system will fail.

Operating environment

a) It is forbidden to use in special environments such as high
temperature, humidity, strong electromagnetic interference,
etc.
b) The equipment must be installed in a place where there is
no direct sunlight and away from the fire sources.

Installation

a) The equipment must be installed on a horizontal surface.
Otherwise, the refrigeration system will fail;
b) It is forbidden to place objects within 1 meters around the

Содержание CW-5000 Series
















Отзывы: