SANCH S3000 Series, Руководство пользователя

Страница: 30 / 139

4-13
Parameters Functions Settings
Factory
Setting
Customer
02-13
Multi-Function Output 3
MO1
19: 1
st
step of PCO completed
20: PCO completed
21: pre-set counter value
attained
22: desired counter value
attained
23: heat sink overheat warning
24: operation frequency attained
1 (both directions)
25: operation frequency attained
2 (both directions)
26: pre-set frequency attained 1
(both directions)
0
02-14
Multi-Function Output 4
(MO2)
27: pre-set frequency attained 2
(forward only)
28: pre-set frequency attained 1
(both directions)
29: pre-set frequency attained 2
(forward only)
30: software braking output
31: position achieved
32~47: PCO step indication
48~63: multi-step indication
64: PG Fault
65: PG Stall
69: over-torque(oL3)
70: Zero speed (STOP)
71: Position synchronization 1
(10-10)
72: Position synchronization 2
(10-23)
0: no functions
0
02-15
Multi-Function Output
Direction
0~15 (1 high) 0
02-16
Counter Values
Achieve the Pre-Set
Values
0~65500 0
02-17
Designated Counter
Value Achieved
0~65500 0
02-18 Digital Output Gain 1~40 1
02-19
Pre-set Arrival
Frequency 1
0.00~400.00HZ
60.00/
50.00
02-20
Pre-set Arrival
Frequency 1 Width
0.00~400.00HZ 2.00
02-21
Pre-set Arrival
Frequency 2
0.00~400.00HZ
60.00/
50.00