MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
18
Enable Security Phone Book
User can use this command to enable/disable Security Numbers Functions.
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
,
「
on/off
」
*
Command: #username,0000,security,on*
Note: The numbers preset in “SOS Phone” and “Phone Book” are also considered as Security Phone number once this
function is enabled.
SMS/ COTA Command
Description
#
Start sign.
username
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
security
Mode “security” defines the enable Security Phone Number mode.
on Only accept calls/commands by security number.
on/off
off Accept all the calls/commands.
*
End sign.
Table: Enable Security Phone Number Format Description
Situation
Message Reply
Setup Succeeds
<OK>Security ON!,V4.112;100%
<OK>Security OFF!,V4.112;100%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: Enable Security Phone Number Response Description
