37
5.21 Define Log Interval
When the log function is set “2” (username,0000,21,
2
), you will have to define the number of position data. Please refer
to following command setting.
Setup format
：
#
「
username
」
,
「
Password
」
,
「
20
」
,
「
Number of logged times recorded
」
*
Example
：
#username,0000,20,10*
The table 5.21.1 describes the meaning of each segment in the message above.
The table 5.21.2 shows each confirmation message reply after setup.
Text Keyed In SMS
Description
#
Start sign.
username
Default ID of GC-101S.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
20
Function code
10
When 10 or other defined number of data has completely logged, at the same time, the data
will be sent back to assigned router if GPRS is checked to be available. Default is
2
*
End sign.
Situation
Message Reply
Setup Succeeds
Username, setup OK. Device log report time is updated
Incorrect function code
Username, log setup fail.
Incorrect username or password [username] + Username or Password error
Incorrect function code
[username] + command error
