17
5.4 Set up Host Name (URL) to Transmit Data
This command (SMS) instructs the GC-101 to access an URL or fixed IP for data transmission. If you send the SMS
according to the example seen below to GC-101, the URL “http://www.sanav.com/eric-gga/gprs.aspx “ will be assigned
to receive the data sent from the GC-101. Please note that the question mark “?” or any symbol is not allowed to be keyed
in behind the URL. The GC-101 will add the necessary symbol(s) on automatically.
Setup format
：
#
「
username
」
,
「
Password
」
,
「
Function Code
」
,
「
Fixed IP or URL
」
*
Example
：
#username,0000
，
4,http://www.sanav.com/eric-gga/gprs.aspx*
The table 5.4.1 describes the meaning of each segment in the message above.
Table 5.4.1
The table 5.4.2 is showing each confirmation message reply after setup.
Table 5.4.2
Text Keyed In SMS
Description
#
Start sign.
username
Default ID of GC-101.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
4
Mode 4 defines to trasmit data to a specific website
http://www,sanav.com/eric-gga/gprs.aspx Default domain name, Sign “?” is not allowed to write in the area.
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + GC-101 IP/Domain is updated.
Setup Fail
[username] + IP/Domain setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command format [username] + command error
GC-101 is in Emergency Mode
[username] + in emergency, IP/Domain setup is not allowed.
