Sana 848, Инструкция по эксплуатации

Страница: 23 / 28

21
Disassembly and cleaning
Assembling and Disassembling the Extraction Packing / Seal Packing
(if it is not assembled properly, juice may leak)
Hold the insert and pull it
out smoothly.
To assemble, line up the ridges
and push it in.
Make sure to firmly insert the
extraction seal completely.
01
01
01
02
02
02
03
03
03
Assembling and disassembling the auger seal.
(Improper assembly can damage the seal)
01 02 03
Disassembling and Washing Silicon Parts
(Seals degrade over time and should be replaced every year. You can purchase additional seals
from your authorized Sana distributor.)
Assembling and disassembling the chamber seal.
(Improper assembly can cause leaking)
Assembling and disassembling the juice cap seal.
(Improper assembly can cause leaking)
Pull out the seal by grasping it
from one inner side.
Remove the seal by peeling it
off the holder.
After washing, slide one side
of the seal groove into the
chamber hole.
After washing, hook the seal
onto one side of the holder.
Fit the seal around the hole
and push it into place.
Fit the seal around the holder
and push it into place.
Turn over the auger, and remove
the seal by squeezing the sides of
the seal and pulling it out.
After washing, hold the seal
with wide part facing the auger.
Insert the seal into the bottom of
the auger and push it in around
the entire circumference.