Sana 848, Инструкция по эксплуатации

Страница: 19 / 28

17
How to Assemble: Chamber Set and Main Body
Assemble the chamber set to main body before plugging it in.
1
2
Using Power Dial / If Auger Jams
The auger may jam if you put too much produce into the juicer, or feed it too quickly. Large pieces of firm
produce like beets or carrots can also cause jamming. Cut these into smaller pieces.
If the juicer doesn’t resume after reversing the motor, disassemble and clean out the chamber set.
After reversing, wait for the motor to come to a complete stop, then turn the dial right
to the [ON] position.
Hold the power dial in the [REV] position for 3-5 seconds, and then release. Repeat this
up to three times if needed.
Be sure to let the motor come to a complete stop when going from forward to reverse, or vice versa.
The reverse motion pushes ingredients upward. It only works as long as the power dial is held in the left
direction.
Auger Stops While Juicing
Using Power Dial
①
Turn right to start juicing, set in the middle to stop, and turn left to reverse.
②
To protect the motor, it doesn’t stop immediately, but slows to a stop. [ ].
③
Reverse [REV] only works while the dial is being held in the left position.