Sana 848, Инструкция по эксплуатации

Страница: 17 / 28

15
Assembling Sorbet Set
05
Assembly Guide with Main Body is on page 16.
Chamber Chamber
Sorbet Sorbet
strainer strainer
Discharge Cover Discharge Cover
Hopper Hopper
02
03
Place the sorbet strainer in the chamber.
Wiggle the strainer left and right until the
bump on the strainer fits the groove on the
bottom of the chamber (
③
).
Make sure the discharge cover (
①
) of the
chamber is properly fastened with the loop.
1. Close the discharge cover and fasten it with the
loop.
2. If the seal is not properly inserted or the lever
is not properly closed, the lever may open or juice
may leak.
06
Match the mark [ ] (
⑤
) on the hopper and
the mark [ ] (
②
) on the chamber when
putting the parts together.
The hopper will not close if the inner parts are
not assembled properly.
Turn the hopper clockwise up to the mark
[ ] on the chamber.
The hopper will not close if the inner parts
are not assembled properly.