Samyung N430, Руководство пользователя

Страница: 11 / 63

Installation and Operation Manual
11
2-1 Installation
The chart plotter is supplied with bracket and flush mounting kit. You can choose a method of
installation according to your preference.
2-1-1
Bracket Mounting
Before installing ensure the area the bracket is mounted to is strong enough to support the
weight of the GPS chart plotter. After the location is found, attach the mounting base to the
area using the supplied hardware.
Mounting the display Unit:
1
Hold the display unit and find a groove
joint between the display unit and
bracket.
2
Gently push the display unit into the
groove of bracket
3 Turn the knob to clockwise to lock.
Removing the display unit:
1 Turn the unit off
2 Turn the knob to counter clockwise and
pull the display unit out.
2-1-2 Flush Mounting
1
Find a location for flush mounting.
2
Drill a hole in the area of the cutout area
for the blade of jig saw.
3
insert and cut out the area on the panel
using the jig saw
4
Drill four holes for mounting studs.
5
Install the mounting studs on the chart
plotter and insert them into the mounting
hole.
6
Attach the chart plotter to the mounting
location by attaching the supplied
hardware to the mounting studs.
Note
1
If you flush mount, you need the optional external
GPS antenna.
2
Before Drilling holes make sure there is enough
space to mount the chart plotter there is no
obstructions.
2
Getting Started