SAMSys MP9320, Руководство пользователя

Страница: 27 / 66

Installation
19
Hollow Concrete Block Wall Mounting
To temporarily mount the MP9320 to a hollow concrete block
wall, SAMSys recommends metal sleeve type concrete anchors
that accept a #10 screw and flat washer. To install the MP9320 on
a hollow concrete block wall, perform the following.
1. Refer to Figure 8, and mark the location of the mounting
screws. Do not install the anchors into the mortar joint.
2. Drill the appropriate size hole for a metal sleeve type anchor.
3. Install the anchors.
4. Install the washers and insert the screws.
5. Tighten the screws to within .375” of the anchor.
6. Install the reader and finish tightening the screws.
Solid Concrete Wall Mounting
To temporarily mount the MP9320 to a solid concrete wall,
SAMSys recommends one-piece expansion type concrete
anchors that accept a #10 screw and flat washer. To install the
MP9320 on a solid concrete wall, perform the following.
1. Refer to Figure 8, and mark the location of the mounting
screws.
2. Drill the appropriate size hole for a expansion type anchor.
3. Install the anchors
4. Install the washers and insert the screws.
5. Tighten the screws to within .375” of the anchor.
6. Install the reader and finish tightening the screws.