SAMSys MP9320, Руководство пользователя

Страница: 24 / 66

MP9320 User’s Guide
16
It is highly recommended that the antenna mounting be adjustable
in order to obtain the best performance from the system.
However, the antennas must be installed on a solid surface or
frame to prevent damage or later misalignment. Perform the
following to install the antennas.
NOTE: Use the existing mounting holes on the antenna flange. Drilling
new holes in the flange is not recommended.
1. Determine the location of each antenna. Ensure the
antenna(s) will not be vulnerable to damage by moving
inventory or equipment.
2. Use the antenna as a template and mark the mounting holes.
3. Drill and tap (if necessary) mounting holes for #10 or 1/4
inch mounting screws. For drywall mounting, use drywall
anchors or toggle screws.
4. Mount each antenna and install the mounting screws. Do not
overtighten the screws. Damage to the antenna case may
result.
5. Route each antenna cable back to the reader location. For
dual-opposing or portal configurations, route the opposing
cables so they can not be damaged by equipment or
personnel.
6. Secure each antenna cable with wire ties or other restraint.