Samsung VR330 - DVD - DVDr/ VCR Combo, Инструкция по эксплуатации

Страница: 155 / 198

56 - English
P
layback
While a videotape is playing, you can enjoy a variety of
special playback features, including Still, Frame Advance,
Skip, Slow motion, and more.
Pause
In Play mode, press
√
II
(PLAY/PAUSE)button to still
a single frame.
Frame Advance
In Pause mode, press F.ADV/SKIP button to
advance to the next frame.
Fps/Review
In Play mode, press Forward (
√√
)button or Rewind
(
œœ
)button to Fps/review at two speeds:
• Picture Search - Press and release repeatedly to
advance the tape forward or backward at 2,3,5,7
times normal speed.
• Jet Search - Press and hold to advance the tape
forward or backward at 7 times normal speed.
Skip
In Play mode, press F.ADV/SKIP button to cue
ahead exactly 30 seconds. Press F.ADV/SKIP button
repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In Pause mode, press
√√
button for slow motion.
Press the
√√
button repeatedly to vary slow motion
speed from 1/5 to 1/30 of normal playback. Press
the PLAY button twice to resume normal viewing.
The DVD Recorder & VCR allows you to playback high
quality S-VHS tapes.
1
Insert an S-VHS tape into the VCR deck.
2 Press
√ II
(PLAY/PAUSE) button on the remote
control or on the front panel to play a S-VHS tape.
Special VCR Playback
Features
S-VHS Playback
Each time you record a cassette on this DVD Recorder
& VCR, an “index” is automatically marked on the tape
when recording is started. The Search function allows
you to fast-forward or rewind to a specific index and
start playback from that point. Depending on the direc-
tion selected, the indexes are numbered as follows
• This DVD Recorder & VCR uses a standard indexing
system (VISS). As a result, it will recognize any index-
es marked by other VCRs using the same system and
vice versa.
Go To Zero
Use this feature when you want to search for the
0:00:00 counter position on a cassette.
1 Press the CANCEL button at the point on the tape
where you want to set the counter to 0:00:00.
2 While a cassette is stopped, press the ANYKEY
button.
3
Press the
…†
buttons to select Go To Zero, then
press the ENTER button.
The VCR will rewind or fast forward, searching for
the 0:00:00 counter position, and then automati-
cally stop at that position.
Variable Search
System
VCR
Go To Zero
End Search
Forward Intro Scan
Reverse Intro Scan
Go To Zero
¦¦
00:00:49
SELECT MOVE
00995B_VR330_XAC-Eng2 2006.3.14 3:20 PM Page 56