English _
107
This chapter explains how to connect the camcorder to a computer using the USB cable. Read this chapter carefully
and be free from your burden of handling two devices at the same time.
CHECKING YOUR COMPUTER TYPE
(
)
To view your recordings on a computer, you need to check your computer type first. And then, take the steps below
according to your computer type.
using with Windows computer
(VP-DX205(i)/DX2050/DX210(i) only)
The supplied software CD,
‘CyberLink MediaShow4’ is not
Macintosh compliant.
To play back or edit videos on
Macintosh, you may install and
use QuickTime Player(v7.5.5 or
higher)/iMovie application(not
supplied).
Install the provided software CD,
“
CyberLink MediaShow 4
” on
Windows.
page 109
Refer to the software’s installation
guide.
Connect your camcorder to the
computer using the USB cable.
pages 111~114
You can transfer data to a
Macintosh computer using the
USB cable.
page 116
Upload videos to YouTube.
page 115
Playback videos or photos on your
computer using the CyberLink
MediaShow4 application.
pages
114~115
To play back or edit videos on
Macintosh, you may install and
use QuickTime Player(v7.5.5 or
higher)/iMovie application(not
supplied).
Using with Windows
Using with Macintosh