104
_ English
DUBBING IMAGES ON A VCR OR DVD/HDD RECORDER
• This function is available in
DISC Play/CARD Video Play/CARD Photo
Play
mode.
page 26
You can dub images played back on this DVD camcorder onto other video
devices, such as VCRs or DVD/HDD recorders. Use the provided AV cable to
connect the DVD camcorder to another video device as shown in the following
figure:
1.
Slide the
POWER
switch downwards to turn the power on, then open the
LCD screen.
page 26
• Set the appropriate storage media. (VP-DX205(i)/DX2050/DX210(i) only)
page 38
2.
Press the
MODE
button to select the
Play
(
)
mode.
3.
Press the
MENU
button and use the
Joystick
to set the desired “
Play
Mode
” on the menu.
4.
Use the
Joystick
to select the recorded (dubbed) image in the thumbnail index view, then press the
Joystick
.
5.
Press the record button on the connected device.
• The DVD camcorder will start playback and the recording device will dub it.
• Refer to “Editing chapter” to create a playlist by selecting desired scenes from those recorded on this DVD
camcorder.
pages 52~54
• Audio is heard from the speaker. If the volume is too high, noise may enter the dubbed image.
• Be sure to use the AC power adaptor to power the DVD camcorder to prevent battery power from shutting
off during recording on another video device.
• Make sure to set “
AV In/Out
” to “
Out
” before connecting to an external device.
(VP-DX200i/DX205i/DX210i only)
• Be careful not to disconnect AV cable accidentally by sliding the
OPEN
switch.
VCRs or DVD/HDD recorders
Signal fl ow
AV cable
DVD camcorder
connecting to AV devices