Samsung Ubigate iBG2016, Руководство по устранению неисправностей

Страница: 4 / 24

GENERAL USER INFORMATION
II
© SAMSUNG Electronics Co., Ltd.
Allowing this equipment to be operated in such a manner as to not
provide for proper answer supervision is a violation of Part 68 of the
FCC’s rules.
TELEPHONE CONNECTION REQUIREMENT
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ATCA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
FCC Part 68
This equipment complies with Part 68 of the FCC rules. The FCC Part 68 label
is located on the bottom chassis panel. This label contains the FCC Registration
Number and Ringer Equivalence Number(REN) for this equipment. If requested,
this information must be provided to your telephone company.
Connection to the telephone network should be made by using standard
modular telephone jacks, type RJ-11C. The RJ-11C plug and/or jacks used
must comply with the FCC Part 68 rules.
CIRCUIT TYPE MODULE TYPE
FACILITY
INTERFACE CODE
NETWORK
JACK
LOOP START
LINE
FXO-4M, FXO-2M
T1E1-2M, T1E1-1M
T1E1-4
02LS2
04DU9.DN
04DU9.1KN
04DU9.1SN
04DU9.1SN(PRI)
04DU9.DN
04DU9.1KN
04DU9.1SN
04DU9.1SN(PRI)
RJ11C
RJ48C
RJ48C
DID LINE FXS-4M, FXS-2M,
FXS-24
T1E1-2M, T1E1-1M
T1E1-4
02RV2.T
04DU9.BN
04DU9.BN
RJ11C
RJ48C
RJ48C
E & M TIE LINE E & M-2M, E & M-1M
T1E1-2M, T1E1-1M
T1E1-4
TL11M
04DU9.BN
04DU9-BN
RJ45S
RJ48C
RJ48C