Samsung Ubigate iBG2016, Руководство по устранению неисправностей

Страница: 20 / 24

TroubleShooting Manual
6
© SAMSUNG Electronics Co., Ltd.
FXO connect alarm
This is an alarm to notify whether ports are connected or not in analog
channels of FXO card using loop start.
Symptoms
On the iBG2016 system, following event will be occurred.
#Feb 09 12:00:39 error EVENT Notify that FXO port
is connected when using Loop-start only RAISE
#Feb 09 12:00:42 informational EVENT Notify that FXO
port is connected when using Loop-start only CLEAR
Possible Causes
The physical port connected to FXO is removed.
The FXS port that connected at opposite side is removed.
Troubleshooting
1.
Check the line of port is inserted correctly.
2.
check it is inserted that is connected at remote FXS port.