ENG-13
5
Press OK to start the auto scanning.
Result:
◆
The PLEASE WAIT indication flashes on
the television screen.
◆
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
The VCR then searches for the second
station and so on.
◆
When the automatic scanning procedure
has finished, the VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by the
VCR depends on the number of stations that it has
found.
6
If you wish to cancel the auto scanning before the
end, press the MENU button three times to exit the
menu.
➢
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 15).
☛
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto
Set Up on page 10).
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 10)
◆
Automatically
◆
Manually (see page 14)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO SET UP option is selected.
Press the
❿
button to select this option.
Presetting the Stations Automatically
AUTO SET UP
PLEASE WAIT
2
%
I--------------------I
END:
MENU
INSTALL
YOUR DATA WILL BE LOST
PRESS
OK
TO CONTINUE
MENU
TO EXIT
❷
➛❿
OK
END:
MENU
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
INSTALLATION
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
❷
❿
END:
MENU
★
Australia Only
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH36
❷
❿
END:
MENU
★
Newzealand Only
02124A SV-675/XSA-eng 3/8/04 6:54 PM Page 13