ENG-29
Using the TV Buttons on the
Remote Control
★
(SV-675/SV-670/
SV-470/SV-275 Only)
Your VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand
Codes
Brand
Codes
SAMSUNG 01 to 06
PHILIPS
02, 20, 22
AKAI
09, 23
SABA
13, 14, 22 to 24
GRUNDIG 09, 17, 21
SONY
15, 16
LOEWE
02
THOMSON 13, 14, 24
PANASONIC 08, 23 to 27
TOSHIBA
07, 16 to 19, 21
Result: If your television is compatible with the
remote control, it is switched off. It is now
programmed to operate with the remote
control.
➢
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
☛
When you change the batteries in the remote
control, you must reprogramme the code,
following the same procedure.
You can then control the television using the following
buttons.
Button
Function
TV STANDBY/ON
Used to switch the television on
and off.
TV or VCR
Used to switch between th TV
and VCR modes. Only the VOL
(+ or –) and TV STANDBY/ON
buttons are operational in VCR
mode. -/-- Used to enter a two-
figure programme number.
Example: For programme 12,
press -/-- followed by
numeric buttons 1 and 2.
INPUT
Used to select an external
source.
VOL + or –
Used to adjust the volume of
the television.
PROG/TRK
Used to select the required
(
or
❷
)
programme.
DISP./
Used to switch between an
external source and the television
➢
The various functions will not necessarily work on
all televisions. If you encounter problems, operate
the television directly.
Auto Power off
The Auto Power Off feature automatically turns off
your VCR if no signal is received and you do not press
any button for the selected time.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO POWER OFF option is selected.
5
Press the
❿
button, until you select the time of Auto
Power off interval.
OFF 2HOUR 3HOUR
6
On completion, press MENU twice to exit the menu.
BONUS
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
NO. OF
INTERVAL REPEAT
: 5
❷
❿
END:
MENU
02124A SV-675/XSA-eng 3/8/04 6:55 PM Page 29