ENG-20
11
Select the required recording end time by pressing
the
or
❷
buttons, following the same procedure
as when selecting the recording start time.
12
Press
❿
to select the the recording speed
(AUTO/SP/LP).
13
Press the
or
❷
buttons to switch between the
AUTO, SP (Standard Play) or LP (Long Play).
14
When you have finished, press the MENU button.
15
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: Before starting recording, the VCR
compares the timer duration with the
remaining time on the cassette.
➢
Auto Tape Speed Select
The VCR’s “Auto Tape Speed Select” function
compares the duration of the timer recording to the
actual recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the VCR automatically
switches to LP mode to record the
whole programme.
E.g. If there is a one hour AUTO mode timer
recording to be started, but only 40 minutes of
tape remaining, the VCR will record in SP for
20 minutes and switch to LP mode for the
remaining 40 minutes.
Using the Timer Programming Feature
PROG
❷
➛❿
DELETE:
CLR/RST
MENU
1/JAN THU 21:28
PR DAY START
→
STOP
1 TH 1 12:00
→
12:50SP
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
-- ---- --:--
→
--:----
★
(SV-675/SV-275)
** TIMER METHOD **
STANDARD
G-CODE
❷
❿
END:
MENU
The Timer Programming feature allows you to preset
the VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
☛
Before presetting a recording, check that the
date and time are correct.
1
- Insert the cassette. Press the TIMER button.
Press the
or
❷
buttons to select the
STANDARD option and then press the
❿
button or,
◆
Press MENU on the remote control.
Result: The programming menu is displayed.
◆
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2
Press
❿
to select the input source.
3
Select the required station by pressing the
,
❷
buttons or INPUT to select the LINE IN 1 or
LINE IN 2
★
(SV-675/SV-275 only) input sources.
4
Press
❿
to select the recording day.
5
Select the required day by pressing the
or
❷
buttons.
6
Press
❿
to select the recording start time.
7
Select the required hour value by pressing the
or
❷
buttons.
8
Press
❿
to select the minutes.
9
Select the required minute value by pressing the
or
❷
buttons.
10
Press
❿
to select the recording end time.
02124A SV-675/XSA-eng 3/8/04 6:54 PM Page 20