SPEED DOME CAMERA
User Guide
40
SPEED DOME CAMERA
User Guide
41
Installing Your Camera
1. Secure Camera and Install Base
As shown in the picture below, secure
the install base and camera using 3
hexagon screws.
2. Connect Safety Cable
Hook the safety cable on the back of
the camera to the loop on the bracket.
• Secure Camera and Attach Safety Cable
• Preset Number Setting Screen :
ID=001
①②③
Area1 Area Name
G-SEQ1
PRESET=001 Preset Name
P:300 T:040 10X
Motion Detect
Alarm Input
Preset Info
Sequence Status
• Motion Detection Standby/Operation Display :
- When in standby mode, the "
" in the upper right of the screen blinks and then
changes to " " if motion is detected.
• Alarm Input Port Status Display :
- "
①
","
②
" and "
③
" in the upper right of the screen blink.
• Current Alarm Port Display According to Input Alarm Ports(Priority) :
- Only one of "
","
","
" in the upper right of the screen blinks.
• Preset Number Display Settings :
- '*' : If a preset number is already available
- 'H' : If a preset location is the camera’s home position
- 'T' : If a preset location is the camera’s Auto Track starting point(SPU-3750T Only)
• If an OSD Menu has Sub Menus :
- The color of the circle around the menu number shows as embossed, e.g. "
①
".
• If an OSD Menu Does Not Have Sub Menus :
- The circle around the menu number shows as engraved, e.g. "
".
• PTZ Function Screen :
Area Display
Preset Edit
Preset=011
*
(1~255)
Interface Symbols
