Samsung SPU-3750T, Руководство пользователя

Страница: 42 / 49

SPEED DOME CAMERA User Guide
82
SPEED DOME CAMERA User Guide
83
Functional Description Functional Description
Alarm Setting
Alarm Enable OFF
② Alarm Input
③ Alarm Output
④ Aux Output
AUX Output
On/Off OFF
Time 00 SEC
Main Menu
① Camera Setting
② Sequence Setting
③
P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥
Initialize
Status
➡
➡
25.3. Aux Output
▶ Main Menu/Alarm Setting/Aux Output
•ConnectingthepowerconnectorandGNDincorrectlytotheAuxterminal’sNOandCOM
ports may cause a short circuit and fire, damaging the camera.
•Themaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,and
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s
lifespan and damage it.
Notes
AUX Output menu is to operate the camera’s peripheral
devices such as lamps and sirens through the controller and
switches as well as through network communications.
On/Off :
- Cancels or activates the Aux function.
Time :
Enables setting up a duration for the Aux output when the
Aux command is transmitted from the controller. A
duration can be selected from a minimum of 1 second to a
maximum of 60 minutes.
⇨
NO
COM
AUX Off
NO
COM
AUX On
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥
Initialize
Status
26. Initialize
26.1. Initialization Menu
▶
Main Menu/Initialize
Power On Reset :
Restarts the camera.
Factory Default :
Enables resetting the camera to its factory default settings.
When the mode is selected, all custom data such as preset
locations is deleted from the camera. Use this function if it
is necessary to reset the settings of the camera.
Camera Default :
This mode can be used if the camera module has been
replaced and you want to keep the camera's existing
settings for the new module.
To reset the camera, first replace the old module with a
new camera module. When the replacement is properly
installed, turn on the module, then execute this command.
Auto Refresh :
Enables optimizing the status of the camera’s built-in
electric circuits and components on a regular basis. (A
regular operation can be scheduled.)
This mode can be used to maintain and repair the current
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days : Selecting Off disables Auto Refresh and
selecting 1~7 Days automatically executes it after 1~7
days has passed.
✽
Auto Refresh takes approximately 10 seconds to finish. If
Auto Refresh activates in the middle of a sequence action,
the camera pauses the sequence action and performs an
Auto Refresh, then resumes the sequence action once the
refresh is complete.
Auto Track Default :
Enables resetting the Auto Track settings.
Fan Life :
Enables setting the Fan Life.
Initialize
Initialize
① Power On Reset
② Factory Default
③ Camera Default
Auto Refresh OFF
⑤ Auto Track Default
⑥ Fan Life
➡