Samsung SHR-3091 Скачать руководство пользователя страница 87

Страница: 87 / 98

Digital Video Recorder

Appendix A — USB Hard Disk Drive Preparation

Preparing the USB-IDE hard disk drive in Windows 2000

NOTE: Preparing a USB-IDE hard disk drive under Windows XP is almost identical to
Windows 2000.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer.

The USB device icon should display on the Taskbar.

If the USB-IDE hard disk drive is partitioned or has data, it will show up in

Computer

as a hard disk drive icon. Check the file system by right clicking on the

icon and checking under

Properties

General

File System.

If the file system is

NOT FAT32 format, format the USB-IDE hard disk drive using the FAT32 format.

If the USB-IDE hard disk drive is not partitioned, go to

Administrative Tools

Control Panel

and launch

Computer Management.

Open

Disk Management

Storage

and right click an unallocated region of the USB-IDE hard disk drive. Then,

click

Create Partition.

In the

Create Partition wizard

, click

Next

then

Primary Partition

, and follow the

instructions on the screen. Make sure that the FAT32 is selected for the file system.

NOTE: The partition size should be less than 32GB because of Microsoft limitations.

After formatting is complete, the USB-IDE hard disk drive will be added to

Computer

7. Connect the USB-IDE hard disk drive to the DVR.

Preparing the USB-IDE hard disk drive in Windows 98

NOTE: Preparing a USB-IDE hard disk drive under Windows ME is almost identical to
Windows 98.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer. The

Add New Hardware wizard

window will appear.

Install the device driver for the USB backup device following the instructions
provided with your USB hard disk drive.

If the USB-IDE hard disk drive is partitioned or contains data, it will show up in

Computer

as a hard disk drive icon. Check the file system in

Properties

General

File System.

If the file system is NOT FAT32 format, format the USB-IDE hard disk

drive with FAT32 format.

Run the FDISK utility by clicking

Start

then

RUN

. Type “fdisk” and click OK.

When the MS-DOS command prompt appears, type “Y” and hit the enter key.

In the FDISK Option menu, choose

“5. Change current fixed disk drive.”

Содержание SHR-3091



































































































Результаты поиска

Содержание SHR-3091

Отзывы:

Похожие инструкции для SHR-3091

Бренды по названию

Популярные бренды

Samsung SHR-3091, Руководство пользователя

Результаты поиска

Содержание SHR-3091

Отзывы:

Похожие инструкции для SHR-3091

Бренды по названию

Популярные бренды