manualshive.com logo in svg

Samsung SHR-2042, Руководство пользователя

Поделиться
Скачать
Samsung SHR-2042 Скачать руководство пользователя страница 26

SHR-2040/2041/2042 USER’S MANUAL

2-9

8. Check the connector, wiring, and cable fixing condition inside the product and close the

cover.

9. Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side)

✻ 

You can apply 2 HDDs to each BRACKET-HDD as shown in the figure.

Caution

Caution

For HDD addition, please select the same HDD with the existing HDD fixed to the product as
far as possible. 
- SHR-2040 : 1 at Primary Slot and 1 at Secondary Slot respectively
- SHR-2041 : 2 at Primary Slot and 2 at Secondary Slot respectively
- SHR-2042 : 2 at Primary Slot and 1 at Secondary Slot(The internal CD-RW is connected to

the secondary master.) respectively

Both HDDs attached to Primary Slot and Secondary Slot should be set to Master and Slave 
respectively. Refer to User’s Manual for Master or Slave Jumper Setting.

In the event of only one HDD installation, it shall be inserted into the Primary slot.

Note

Note

Refer to Appendix 2 to see which HDD specifications are supplied.

SHR-2040/2041/2042-ENG-1  2005.6.29  4:58 PM  Page 2-9

Содержание SHR-2042





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды