Samsung SHR-2042 Скачать руководство пользователя страница 43

Страница: 43 / 188

Live screen Mode

4-2

Definition of Live Screen Icon

The Live screen icons display the current setup and function status of each screen.

PTZ

CAM_01

V.Loss

: Recording Icon

Each icon represents Normal / Event (Alarm + Motion) / Schedule Recording.

: Recording Video Size Icon

Each icon represents the recording size of Large / Normal / CIF.
- Large : Full D1 - (NTSC) 720X480 (PAL) 720X576
- Normal : Half D1 - (NTSC)720X240 (PAL) 720X288
- CIF

: CIF - (NTSC)352X240 (PAL)352X288

(Full D1 is supported only when “1 CH DVR support”)

: PTZ Icon

This icon appears when setting the PTZ device with the PTZ icon and changes to yellow color
when operating the PTZ.

: Audio Icon

This icon represents the Audio On/Off status and changes to yellow color at the Audio On. It
does not appear in the Video mode or Audio Disable.

: Sensor In Event Icon

This icon appears in the channel linked with the external sensor signal when inputting the signal
at the Sensor On.

: Motion Event Icon

This icon appears in the Motion Event channel at the Motion Detection On.

: Zoom Icon

This icon appears at the Zoom On or Zoom In and disappears when canceling the Zoom On.

: Freeze Icon

This icon appears in the Freeze mode and disappears when canceling the Freeze.

: HDD Recording Disk Full Icon

This icon appears when the recording space is full in the HDD.

PTZ

SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-2

Содержание SHR-2042





























































































































































































Результаты поиска

Содержание SHR-2042

Отзывы:

Samsung SHR-2042, Руководство пользователя, Страница: 43 / 188

Результаты поиска

Содержание SHR-2042

Отзывы: