manualshive.com logo in svg

Samsung SHR-2042, Руководство пользователя, Страница: 49 / 188

Поделиться
Скачать
Samsung SHR-2042 Скачать руководство пользователя страница 49

4-8

6

Spot-out monitoring

Spot-out Monitoring has nothing to do with Live Screen Output, it monitors the full screen of a
certain channel. If you select the Monitoring in the MENU, the one channel among CH1 ~ CH4
is output with a Spot-out or channels are output one by one at an interval as Auto Sequence
Mode in the Live Mode. Live screen icon does not appear in the spot-out monitoring. 
The interval is as same as the Auto Sequence time in the Live Mode. If the Spot-out Event
Monitoring is On, it is possible to see the event channel with Spot-out. In case of simultaneous
event occurrence at more than one channel, the lowest numbered event channel has the first
priority to be spotted out.

Caution

Caution

If the built-in HDD is not connected, or it operates with power applying in error,(

)

indicating "built-in HDD error" is displayed at the top of left.
At this time,

(1) Live screen mode
(2) Monitoring mode by Smart Viewer

operate only and the other functions including recording, search, playback, menu
setup, and PTZ do not operate.
If the above problem is occurred, be sure to contact a service center to settle the problem.

Caution

Caution

If the fan in a set does not operate or has a problem, a fan  error message pops up in the live
screen as below picture. And the fan error icon        appears at the top of left . If it is, check
the fan in the set. The icon at the top of left disappears automatically if the fan recovers its 
operation.

Fan Information

A error occurs in the fan. 
Refer to the manual.

SHR-2040/2041/2042-ENG-1  2005.6.29  4:58 PM  Page 4-8

Содержание SHR-2042





























































































































































































Отзывы:

Нет отзывов