manualshive.com logo in svg

Samsung SHR-2042, Руководство пользователя, Страница: 113 / 188

Поделиться
Скачать
Samsung SHR-2042 Скачать руководство пользователя страница 113

2

Feature

9-2

●

Thanks to the transmission of video data compressed by the MPEG-4 Video
Compression method, it can play the video images of good quality.

●

Thanks to the G.726 Voice Compression method, it supplies the voice data of
good quality. Use of armored MIC improves the quality of remote voice.

●

Thanks to the transmission of video/audio stream through RTP(Real-Time
Transport Protocol), the real-time video playback is excellent and multi-users’
simultaneous connection does not affect the transmission speed in whole abruptly.

●

Command & Control by RTSP(Real-Time Streaming Protocol) enables safety 
control through the network.

●

Variable transport protocols are supported (TCP/IP, UDP(Unicast, Multicast)).

●

Connection is open to you at any time to monitor video and audio data by inputting
IP Address only.

●

You can not only perform real-time recording(*.dvr format) with User’s PC whereas
necessary during the monitoring but also convert recorded video files(*.dvr format)
into frame unit images((JPEG format).

●

Up to 3 Smart Viewer users are allowed to connect to a DVR simultaneously. 
(If the multicast is used, up to 6 users can connect.)

●

With a Smart Viewer, you are allowed to connect to as many as 9 
SHR-2040/2041/2042s to monitor them simultaneously.

●

Smart Viewer is optimized in the resolution of 1024X768.

SHR-2040/2041/2042-ENG-2  2005.6.29  5:2 PM  Page 9-2

Содержание SHR-2042





























































































































































































Отзывы:

Нет отзывов