Samsung SH-EAV Series, Руководство по установке

Страница: 15 / 22

E-
15
ENGLISH
Assigning address to indoor unit
1
Before installing the indoor unit, assign an address to the indoor unit
according to the air conditioning system plan.
2
The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02)
and RMC(SW03, SW04) rotary switches.
3
The MAIN address is for communication between the indoor unit and
the outdoor unit. Therefore, you must set it to operate the air conditioner
properly.
4
It is required to set the RMC address if you install the centralized control
and/or the centralized control.
5
If you install optional accessories such as the wired remote control,
centralized control, etc. see an appropriate installation manual.
6
If an optional accessory is not installed, you do not have to set the RMC
address. However, adjust K1 and K2 switches of the SW05 DIP switch to “ON”
position in this case.
7
Set the MAIN address by adjusting the rotary switch(SW01, SW02) from
0 to 9. Each indoor unit connected to the same outdoor unit must have
different address.
���� ���� ����
����
����
����
����
����
���
����
���
SH@@@EAV@_IM_E_28847-1.indd 15 2007-12-07 ｿﾀﾈﾄ 6:10:46