93
5.
To create a new connection, press the
Options
soft key, select
New
, and
press the
Select
soft key or the
key.
- or -
To edit the existing AT&T MMS, highlight this entry, press the
Options
soft
key, select
Edit
, and press the
Select
soft key or the
key.
6.
Select the parameter you want to edit:
• Set Name
: enter a profile name.
• Access Name
: edit the access point name.
• Auth Type
: select the type of authentication used for this WAP connection:
None, Normal, or Secure.
• User ID
: enter the User ID required to connect to the network.
• Password
: enter the user password required to connect to the network.
• Protocol
: set the connection protocol used by the WAP browser: WAP, HTTP, or
Other.
• Home URL
: enter the URL address of the page to be used as your homepage.
• Proxy address
: MEdia Net set as the proxy server address and port.
• Secure Connection
: allows you to activate or deactivate a secure connection.
• Linger Time (Sec.)
: set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
• Advanced Settings
: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
-
Static IP
: specify if you want to manually enter an IP address. If you want the IP
address to be automatically assigned by the server, remove the check mark.
-
Local Phone IP
: allows you to configure the local phone IP address.
-
Static DNS
: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
-
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
-
Traffic Class
: select the traffic class.
Note:
The WAP settings may vary depending on the service provider.