Setup
142
Keypad light
(Menu 8-2-3)
You can set the backlight mode for the keypad.
Normal Mode flashes the backlight when you press
any key. Select Save Mode to use the backlight
only between 5:00 PM and 8:00 AM. Doing this
saves the battery power.
Service LED
(Menu 8-2-4)
In this menu, you can select the length of time the
service light blinks before going off.
1. Enter the time period for the service light to be
blink using the number keypad and press
.
2. Select Set and press
.
To turn off the service light, select Cancel.
Auto Dial
(MENU 8-3)
You can set the phone to automatically dial an area
code or international call code when you make a
call.
Area Code
(MENU 8-3-1)
Enter the area code and select Set. The code will be
displayed each time you open the phone to make a
call or press
.
International Call
(MENU 8-3-2)
Enter an international call service number and
select Set. The number will display when you press
and hold
in Standby mode.
Setup
143
Call Answer
(Menu 8-4)
This menu allows you to select how to answer an
incoming call.
The following options are available:
Folder Open: The phone answers when you open
the phone. If the phone is already open, press
.
Any Key: When the phone is open, you can press
any key except for
and Volume keys. When the
phone is closed, you can answer the call by opening
the phone.
Change Lock
(MENU 8-5)
This feature allows you to change your current lock
code to a new one. The lock code is preset to
“0000” at the factory.
To change the lock code, enter the current lock
code. Enter a new, 4-digit lock code and enter the
code once again at the prompt.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write
the lock code down or memorise it if you have
changed.