56
Finding a Contacts Entry
Voice Method
Use the VoiceSignal
Contacts
command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note:
The
Contacts
command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press and hold
to launch
VoiceSignal
.
“
Say a Command
” appears in the display and is pronounced through the
speaker.
2.
Say “
Contacts
”.
VoiceSignal prompts you to “
Say the name.
”
3.
Speak clearly and say the full name of the person you want to call, exactly
as it is entered in your contact list.
•
If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with “
Did you
say?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next name, or use the
keypad to select the correct name from the list. (See
“Choice Lists
Settings“
on page 111, for more information.)
•
To say the name again, press the
Repeat
(right) soft (
) key.
•
To exit VoiceSignal without dialing, press the
Settings
(left) soft (
) key and
press the
Cancel
(right) soft (
).
5.
The contact information for the name you selected appears in the display.
Keypad Methods
If you’ve stored a named contact in your Contacts list, Find lets you locate the entry
quickly.
1.
In standby mode, do one of the following:
•
Press the
Contacts
(right) soft key (
).
•
Press the
MENU
(
) key, then press
(for
Contacts
) and
for
Find
.
The
Find
screen appears in the display with
By Name
showing.
OK
@
@
