63
Chapter 5. Menu
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Press the
MENU
button on the remote control.
2
Select
Network
-
Open Network Settings
.
3
Select
Wired
.
‒
The network test screen appears and then the verification process starts.
4
When the connection has been verified, select
OK
.
• If the connection process fails, check the LAN port connection.
•
If the automatic process cannot find the network connection values or if you want to
set the connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask,
gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these
steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click
Status
.
3
On the dialog that appears, click the
Support
tab.
4
On the
Support
Tab, click the
Details
button. The Network connection values are
displayed.
How to set up manually
1
Press the
MENU
button on the remote control.
2
Select
Network
-
Open Network Settings
.
3
Select
Wired
.
‒
The network test screen appears and then the verification process starts.
4
Select
Stop
. The verification process stops.
5
Select
IP Settings
. The
IP Settings
screen appears.
6
Select
IP Setting
and set it to
Enter Manually
.
‒
Setting
IP Setting
to
Enter Manually
automatically changes DNS Setting to
Enter
Manually
.
7
Enter the network connection values.
‒
IP Address
,
Subnet Mask
,
Gateway
,
DNS Server
.
8
When done, select
OK
at the bottom of the page, and then press
. The network
test screen appears and the verification process starts.
9
When the connection has been verified, select
OK
.
