OfficeServ 500 Wireless LAN Service Manual/Ed.00
CHAPTER 5. Maintenance
© SAMSUNG Electronics Co., Ltd.
Page 5-23
7) Select the < A)Ascii > menu by clicking [A] button on the <Upload Protocols>
window.
8) Enter the path of the file to be uploaded. For instance, if the file to be uploaded is
located as same as the qmodem file, enter the ‘.\WLIROM.HEX’. If the file to be
uploaded is not located as same as the qmodem file, enter the file name as well as
the whole path of the upload file.
9) If enter the file name, following ‘Upload Files(Transmit)’ window appears
***********************Upload Files(Transmit)*********************
Enter the transfer mode:
1)Prompted 2) Time delay 3) No delay
****************************************************************
10) Enter ‘3’ and then the following 11) message will be displayed. It is possible to
verify the upload status by scrolling the data.
11) If the upload is completed, the following HEX information will be displayed.
The displayed information can be different according to the software version of
the 8WLI. If ‘Flash Memory Write End’is displayed, it means that uploading is
successfully completed.
===========HEX FILE INFORMATION ==========
HEX FILE START ADDR = 0x00110000
HEX FILE END ADDR = 0x00013465D
HEX FILE TOTAL LEN = 0x0002465D
------------ FLASH MEMORY WRITE START -------------
STEP 1. SECTOR ERASE
SUCCESS
STEP 2. PROGRAM WRITE SUCCESS
---------- FLASH MEMORY WRITE END ---------------
Please [R] key to Restart or [L] key to Loading Again !!
12) Click [L] and then the following message will show up.
<WLI>file
========== Select One =============
[1] Single WLI HEX FILE Loading <Addr = 0x00110000>
[2] Multi WLI HEX FILE Loading <Addr = 0x00190000>
[R] Restart
