OfficeServ 500 Wireless LAN Service Manual/Ed.00
CHAPTER 4. MMC Programming
© SAMSUNG Electronics Co., Ltd.
Page 4-17
2.7 Setting the MMC831 MGI Parameters
This MMC provides a mean to configure the Internet Protocol(IP) addressing of the
MGI card(s). This MMC must be utilized MGI card(s) used on the system.
Table 4.4 MMC831 Parameters
Number
Parameters
Description
0
IP ADDRESS
Specifies the IP address for the MGI card.
1
GATEWAY
Specifies the designated IP gateway address used for contacting IP
devices beyond the local subnet.
2
SUB MASK
Specifies the IP subnet mask. This parameter is used by the system to
calculate the range if IP devices(subnet) that are within ‘direct reach’
of the MGI(without having to go through the designated network IP
gateway).
3
PUBLIC IP
The MGI will originate communications, to IP phones and VoIP
connections outside the local network, using this IP address. If this
IP address sets 0.0.0.0, 255.255.255.255 or default value then this
MGI card uses private IP only. See System IP Type on MMC 830.
4
STS PERIOD
No entry required. Designates the timed message cycle to check the
remote IP status of MGI3 S/W.
5
VERSION
No entry required. Used to indicate revision of MGI3 S/W.
6
MAC ADDR
For your reference, and cannot be changed. The unique
hardware(MAC)
address of the MGI card.
7
CARD RESET Prompt to restart MGI card when IP address is changed. This use
for MGI 1 and 2 only, MGI3 is self restart automatically.
A MGI card
This MMC cannot be accessed unless there is a MGI card installed in the system.
Program Buttons
VOLUME
Used to scroll through options
KEYPAD
Used to enter selections
SOFT BUTTONS Move cursor left and right
SPEAKER
Used to advance next MMC
