Samsung OFFICESERV 100 Series, Руководство по установке

Страница: 94 / 123

CHAPTER 10. Networking Description and Programming Procedure
10-2 © SAMSUNG Electronics Co., Ltd.
10.1.1 Provide Q-SIG Basic Function
Networking of the OfficeServ 100 system provides basic Q-SIG functions as follows:
10.1.1.1 Intercom Call
This function allows you to call a station of another system as if calling the station in the
same system
.
10.1.1.2 Incoming Call
This function allows you to forward incoming trunk line calls to a station of another system
without any additional operation.
10.1.1.3 Outgoing Call
This function allows you to make calls through the trunk line of another system as if
making an outgoing call through that of the same system.
10.1.2 Provide Inherent Additional Function through Q-SIG
The OfficeServ 100 system networking provides the inherent additional functions below by
using Q-SIG.
10.1.2.1 Unique Numbering Plan
This function allows you to assign phone numbers with minimum programming to stations
of all the systems connected through the network as to those within the same system
10.1.2.2 Called Number/Name Display
When calling the station of another system, the phone number and name of the other party
are displayed as when calling that of the same system.
10.1.2.3 Connected Number/Name Display
When the station of another system is connected, the phone number and name of the other
party are displayed as if connected to that of the same system.
10.1.2.4 Call Progress Display
The phone number and name of the other party is displayed in the same format as within a
single system when calls to another system is transferred, forwarded, or reconnected after
call forward.