English 17
Oper
ations
Dual cook mode
You can use the provided divider to separate the cooking chamber in the upper
and lower compartments. This allows users to enable two different cooking modes
simultaneously, or to simply choose one compartment to cook with.
1.
Insert the Divider in level 3 to
separate the cooking chamber in two
compartments.
2.
Turn the mode selector to select an
cooking mode.
You can select Grill, Convection, and Top
heat + Convection mode on the upper
compartment and Convection, Bottom
heat + Convection, and Bottom heat
mode on the lower compartment.
3.
Press
to select the upper
compartment, or press
to select the
lower compartment.
icon will appear on the selected
compartment.
4.
Set the cooking time and/or temperature
if necessary. See the
Common Settings
section for details.
5.
When done, press
OK
.
The oven starts preheating with icon
until the internal temperature reaches the
target temperature.
Preheating is recommended for all cooking
modes unless otherwise specified in the
cooking guide.
NOTE
Availability of Dual cook mode depends on the cooking mode. For more
information, see the Cooking Guide section in this manual.
Cooking modes (except for Grill)
The cooking modes with an asterisk (*) are available for fast preheating and
disabled for temperatures set at less than 100 °C.
Mode
Temperature range (°C)
Suggested
temperature
(°C)
Single
Dual
Upper
Lower
Convection
* 30-250
40-250
40-250
170
The rear heating element generates heat, which is
evenly distributed by the convection fan. Use this mode
for baking and roasting on different levels at the same
time.
Conventional
* 30-250
-
-
200
The heat is generated from the top and bottom heating
elements. This function should be used for standard
baking and roasting for most types of dishes.
Top heat +
Convection
* 40-250
40-250
-
190
The top heating element generates heat, which is evenly
distributed by the convection fan. Use this mode for
roasting that requires a crispy top (for example, meat or
lasagne).
NV75K5541RS_EG_DG68-00815A-03_EN.indd 17
4/26/2018 7:33:25 PM