10 English
Be
for
e y
ou s
tar
t
Before you start
Initial settings
When you power on the oven for the first time, the default time of “12:00” appears
on the display where the hour element (“12”) blinks. Follow the steps below to set
the current time.
1.
With the hour element blinking, turn the
value dial (right-sided dial) to set the
hour, and then press
OK
to move to the
minute element.
2.
With the minute element blinking, turn
the value dial to set the minute, and then
press
OK
.
To change the current time after this initial
setting, hold down the
button for
3 seconds and follow the above steps.
New oven smell
Before using the oven for the first time, clean inside the oven to remove the new
oven smell.
1.
Remove all accessories from inside the oven.
2.
Run the oven with Convection 200 °C or Conventional 200 °C for an hour. This
will burn any remaining production substances in the oven.
3.
When complete, turn off the oven.
Smart safety mechanism
If you open the door while the oven is operating, the oven light turns on and
both the fan and the heating elements stop operation. This is to prevent physical
injuries such as burns as well as to prevent unnecessary energy loss. When this
happens, simply close the door and the oven continues to operate normally
because this is not a system failure.
Accessories
For first time use, clean the accessories thoroughly with warm water, detergent
and a soft clean cloth.
05
04
03
02
01
01
Level 1
02
Level 2
03
Level 3
04
Level 4
05
Level 5
•
Insert the accessory to the correct position
inside of the oven.
•
Allow at least a 1 cm space from the
accessory and the bottom of the oven, and
from any other accessory.
•
Take caution in removing cookware and/
or accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may be deformed while
they are gaining heat. Once they have
cooled down, they will recover their
original appearance and performance.
NV75K5541RS_EG_DG68-00815A-03_EN.indd 10
4/26/2018 7:33:15 PM
