manualshive.com logo in svg

Samsung NP-M70, Руководство пользователя, Страница: 54 / 195

Поделиться
Скачать
Samsung NP-M70 Скачать руководство пользователя страница 54

Using the Computer   35

Separating and Installing the LCD Panel

The procedures for separating the LCD panel from the system and installing the LCD 
panel are described below.

Separating the LCD and installing it on the cradle (optional), allows the LCD to 
be used as a separate LCD monitor. For the procedures to install the LCD to 
the cradle, refer to the additionally supplied cradle manual.

■

 Separate the LCD panel from the system only to install the LCD on the 

cradle. If the cradle is not available, do not separate the LCD from the 
system.

■

 Do not separate the LCD panel from the system while the system is 

turned on or the system is in hibernation. Make sure that the system is 
turned off and then separate the LCD panel from the system.

■ 

While separating the LCD panel, do not press the Power button or the AVS 

button. If any of these keys are pressed and the system is turned on when the 
LCD panel is separated, the system beeps and turns off after 3 seconds.

■

 Release the LCD separation lever latch when only separating the LCD 

panel. When releasing the LCD separation lever latch and using it for the 
tilt function, the signal for the LCD is cut off and no picture is displayed 
on the LCD screen.

■

 In the following cases, the system is not turned on.

- When the LCD (or an external monitor) is not installed on the system.

- When the LCD Separation Latches are not properly closed.

In this case, install the LCD or check if the LCD Separation Latches are 
properly closed.

Содержание NP-M70




































































































































































































Отзывы:

Нет отзывов