15
Chapter 2. Device setup
External sensor kit (sold separately)
The external sensor kit is integrated with the remote control sensor and power
indicator. If mounting the display onto a wall, you can move the External sensor kit to
the side of the display.
The colour and shape of parts may differ from what is shown.
IR IN
1
2
No.
Parts
Description
1
Remote
Control
Sensor
Aim the remote control towards this spot.
• Using other display devices in the same space as the
remote control of this product can cause the other
display devices to be inadvertently controlled.
2
Power
indicator
The power indicator will turn off when the product is
turned on. It will blink in power saving mode.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle
of 30° from the left and right.
• Store used batteries out of reach of children and recycle.
• Do not use a new and used battery together. Replace both batteries at the same
time.
• Remove batteries when the remote control is not to be used for an extended period
of time.
• If you disconnect the power cord from the product while it is in standby mode, the
product remains in standby mode until it runs out of power. The power indicator
turns on or blinks during this time. If you reconnect the power cord, the input source
activates and the product resumes normal operation.
