Samsung ML-3310ND, Руководство пользователя

Страница: 140 / 245

Wireless network setup
37 2. Using a network-connected machine
8
The window shows the wireless network settings and checks
if the settings are correct. Click
Next .
• For the DHCP method
If the IP address assignment method is DHCP, check if
DHCP is shown in the window. If it shows Static, click
Change TCP/IP to change the assignment method to
DHCP.
• For the Static method
If the IP address assignment method is Static, check if
Static is shown in the window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network
configuration values for the machine. Before entering the
IP address for the machine, you must know the computer’s
network configuration information. If the computer is set
to DHCP, you must contact the network administrator to
get the static IP address.
For example:
If the computer’s network information is as shown below:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as
follows:
- IP address: 169.254.133. 43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
- Gateway: 169.254.133. 1
9
When the wireless network setting is completed, disconnect
the USB cable between the computer and machine. Click
Next .
10
The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the
setup procedure.
Select No if you want to return to the beginning screen.
Then, click Next .
11
Click Next when the Confirm Printer Connection window
appears.
12
Select the components to be installed. Click Next .
13
After selecting the components, you can also change the
machine name, set the machine to be shared on the network,
set the machine as the default machine, and change the port
name of each machine. Click
Next .