Wireless network setup
51
2. Using a network-connected machine
8
Click
Next
.
If the wireless security setting window appears, enter the
registered password (network key) and click
Next
.
9
The confirmation window appears, please check your wireless
setup. If the setup is right, click
Apply
.
Disconnect the network cable (standard or network). Your
machine should then start communicating wirelessly with
the network. In case of Ad-hoc mode, you can use a wireless
LAN and wired LAN simultaneously.
20
Turning the Wi-Fi network on/off
1
Check whether the network cable is connected to the
machine. If not, connect the machine with a standard network
cable.
2
Start a web browser such as Internet Explorer, Safari or Firefox
and enter your machine’s new IP address in the browser
window.
For example,
3
Click
Login
on the upper right of the SyncThru™ Web Service
website.
4
Type in the
ID
and
Password
then click
Login
.
•
ID: admin
•
Password: sec00000
5
When the
SyncThru™ Web Service
window opens, click
Network Settings
.
6
Click
Wireless
>
Custom
.
You can also turn the Wi-Fi network on/off.
21
Troubleshooting
Problems during setup or driver installation
►
Printers Not Found
•
Your machine may not be turned on. Turn on your computer and
the machine.
•
USB cable is not connected between your computer and
machine. Connect machine to your computer using the USB
cable.
Содержание ML-3310ND
Страница 3: ...3 93 Regulatory information 104 Copyright ...
Страница 100: ...Regulatory information 103 5 Appendix 22 China only ...