121
Auto Program
MENU
m
→
Channel
→
Auto Program
→
ENTER
E
Channel
Antenna
Auto Program
Clear Scrambled Channel
Fine Tune
Crosstalk Noise Reduction
Cable
On
-
The displayed image may differ depending on the model.
-
Available in
TV
mode only.
The
Auto Program
function memorizes all channels that are available over the air or through your cable system and adds
them to the
Channel List
.
To start
Auto Program
, follow these steps:
1
Push
MENU
m
→
Channel
→
Auto Program
→
ENTER
E
on your remote. The
Auto Program
screen appears.
2
On the
Auto Program
screen, select the source of your product signal.
―
Air
: If your product is connected to an antenna choose
Air
, and then press
ENTER
E
. The product will automatically
start memorizing channels.
―
Cable
: If your product is connected to a cable outlet, choose
Cable
, and then press
ENTER
E
. Go to Step 3.
3
On the cable type screen, use the
buttons to select the type of digital and analog cable systems you have:
STD, HRC, or IRC. Most systems are STD (Standard). When done, select
Next
, and then press
ENTER
E
. The product will
start memorizing channels.
―
Channel memorization can take up to 45 minutes, depending on your cable system.
―
Memorized channels are added to the
Added Ch.
list. These are the channels you will see when you use the channel
buttons on your remote.
Cancelling Auto Program
1
Press the
E
button.
2
A
Stop Auto Program?
message appears.
3
Press the
E
button.
