128
Manual Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the
Support
tab.
4
On the
Support
Tab, click the
Details
button. The Network connection values are displayed.
How to set up manually
1
Go to the
Network Settings
screen. Select
Start
, press
E
, and then press
E
again.
2
The network test screen appears and the verification process starts. Press
Stop
. The verification process stops.
3
Select
IP Settings
on network connection screen. The
IP Settings
screen appears.
4
Select the field at the top, press
E
, and then set
IP Settings
to
Enter manually
. Repeat the entry process for each field in the
IP Address
.
―
Setting
IP Settings
to
Enter manually
automatically changes
DNS Setting
to
Enter manually
.
5
When done, select
OK
at the bottom of the page, and then press
E
. The network test screen appears and the verification process starts.
6
When the connection has been verified, the “
Wired network and Internet connection completed.
” message appears.
