Media and tray
34
2. Basic Setup
-
Arrangement:
Only use labels with no exposed backing between them.
Labels can peel off sheets that have spaces between the labels, causing
serious jams.
-
Curl:
Must lie flat with no more than 13 mm of curl in any direction.
-
Condition:
Do not use labels with wrinkles, bubbles, or other
indications of separation.
•
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can cause
paper jams. Exposed adhesive can also cause damage to machine
components.
•
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the machine.
•
Do not use labels that are separating from the backing sheet or are wrinkled,
bubbled, or otherwise damaged.
Card stock/ Custom-sized paper
•
In the software application, set margins at least 6.4 mm (0.25 inches) away
from the edges of the material.
Содержание M262x Series
Страница 30: ...Media and tray 30 2 Basic Setup ...
Страница 49: ...Redistributing toner 49 3 Maintenance 5 M2625 M2626 M2825 M2826 M2835 M2836 series 1 2 ...
Страница 68: ...Clearing paper jams 68 4 Troubleshooting If you do not see the paper in this area stop and go to next step 1 2 ...
Страница 92: ...Regulatory information 92 5 Appendix 22 China only ...
