Printing quality problems
211
5. Troubleshooting
Character voids
Character voids are white areas within parts of characters that should be solid black:
•
If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character
voids are normal.
•
You may be printing on the wrong surface of the paper. Remove the paper and turn it around.
•
The paper may not meet paper specifications.
Horizontal stripes
If horizontally aligned black streaks or smears appear:
•
The toner cartridge may be installed improperly. Remove the cartridge and reinsert it.
•
The toner cartridge may be defective. Remove the toner cartridge and install a new one.
If the problem persists, the machine may require repairing. Contact a service representative.
Curl
If the printed paper is curled or paper does not feed into the machine:
•
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
•
Change the printer’s paper option and try again. Go to
Printing Preferences
, click the
Paper
tab, and set type to
Thin
.
Condition
Suggested Solutions
A
Содержание M262x Series
Страница 30: ...Media and tray 30 2 Basic Setup ...
Страница 49: ...Redistributing toner 49 3 Maintenance 5 M2625 M2626 M2825 M2826 M2835 M2836 series 1 2 ...
Страница 68: ...Clearing paper jams 68 4 Troubleshooting If you do not see the paper in this area stop and go to next step 1 2 ...
Страница 92: ...Regulatory information 92 5 Appendix 22 China only ...