Printing quality problems
207
5. Troubleshooting
Black background
If the amount of background shading becomes unacceptable:
•
Change to a lighter weight paper.
•
Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount
of background shading.
•
Remove the old toner cartridge and install a new one.
•
Thoroughly redistribute the toner (see "Redistributing toner" on page 48).
Toner smear
•
Clean the inside of the machine.
•
Check the paper type and quality.
•
Remove the toner cartridge and install a new one.
Vertical repetitive defects
If marks repeatedly appear on the printed side of the page at even intervals:
•
The toner cartridge may be damaged. If you still have the same problem, remove the toner cartridge and, install a new one.
•
Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after
a few more pages.
•
The fusing assembly may be damaged. Contact a service representative.
Condition
Suggested Solutions
Содержание M262x Series
Страница 30: ...Media and tray 30 2 Basic Setup ...
Страница 49: ...Redistributing toner 49 3 Maintenance 5 M2625 M2626 M2825 M2826 M2835 M2836 series 1 2 ...
Страница 68: ...Clearing paper jams 68 4 Troubleshooting If you do not see the paper in this area stop and go to next step 1 2 ...
Страница 92: ...Regulatory information 92 5 Appendix 22 China only ...