Samsung Inkjet SF-430 Скачать руководство пользователя страница 176

Страница: 176 / 190

7.17

ROUBLESHOOTING

Blurred or
smudged ink

• You may printing on the wrong side of the paper. Turn

the paper over and print on the other side.

• The paper may not meet paper specifications (for

example, too moist or too rough). See “Paper Selection”
on page 2.2.

• Let the ink dry before handling the paper.

Characters with
white lines

• The print cartridge may be almost empty. Check the

contacts of the print cartridge and replace, if necessary.

• The print cartridges may need to be cleaned. See

“Cleaning the Print Cartridges” on page 6.3.

Characters are
improperly formed
or not aligned
correctly

• The print media is loaded incorrectly or is an

unsupported size or type. Use the print media specified
in “Paper Selection” on page 2.2.

• If characters are improperly formed, producing a wavy

effect, the scanner unit may need servicing.

• The print cartridges may need to be cleaned. See

“Cleaning the Print Cartridges” on page 6.3.

• The print cartridges may need to be aligned. See

“Aligning the Print Cartridges” on page 6.16.

Vertical lines in
tables, borders
and graphics not
smooth

• The print cartridge may need to be cleaned. See

“Cleaning the Print Cartridges” on page 6.3.

• The print cartridge may need to be aligned. See

“Aligning the Print Cartridges” on page 6.16.

Solid black areas
contain white
streaks

• Change the fill pattern in the application software.

Printing appears
jagged

• The print resolution selected in the printer driver may

be low. Check the printer driver for the correct
resolution. Printing in low resolution will give the
printout a jagged look. Change the Print Quality to a
higher resolution. See page 2.11.

Problem

Possible Cause and Remedy

Содержание Inkjet SF-430































































































































































































Результаты поиска

Содержание Inkjet SF-430

Отзывы:

Похожие инструкции для Inkjet SF-430

Бренды по названию

Популярные бренды

Samsung Inkjet SF-430, Руководство пользователя

Результаты поиска

Содержание Inkjet SF-430

Отзывы:

Похожие инструкции для Inkjet SF-430

Бренды по названию

Популярные бренды