Samsung HL-T5089, Инструкция пользователя

Страница: 84 / 271

English - 84
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1 Press the button.
2 Press the ▲ or ▼ button to select Receiver , press the ◄ or ► button to select to On . Now
you can listen to sound through the receiver.
Press the EXIT button to exit.
➢
When the receiver is set to On, you may listen to the TV sound through the
2-channel(Stereo) Sound. This is not always true. When TV is displaying DTV(air) TV can
send out 5.1 channel sound through SPDIF. But when the source is DVD(for example),
TV can receive only 2 channel sound using HDMI. In that case, 2 channel sound is only
transmitted to the Receiver through SPDIF.
➢
If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the device list.
➢
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
➢
When Receiver is set to On, a Bluetooth device may not work properly. Or while a Bluetooth device is operating, listening through
the receiver does not work.
➢
In case of a content with copyright problem, listening through the receiver does not properly operate.
➢
When executing WISELINK, the listening through the receiver may not work properly.
➢
When listening through the receiver, there are restrictions for using the PIP and audio-related menu.
Check Points before Requesting Service
Symptom Solution
Anynet
+
does not work. ■ Check if the device is an device. The system supports devices
only.
■ Connect only one receiver (home theater).
■ Check if the device power cord is properly connected.
■ Check the device’s Video/Audio/HDMI 1.3 cable connections.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is exclusive remote control.
■ doesn’t work at a certain condition. (Searching channels, operating WISELINK)
■ When connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or restart your TV.
■ Check if the Function of device is set on.
I want to start Anynet
+
. ■ Check if the device is properly connected to the TV and check if the
(HDMI-CEC) is set to On in the Setup menu.
■ Press the TV button on the TV remote control to switch to TV. Then press the
button to show the menu and select a menu you want.
I want to exit Anynet
+
. ■ Select View TV in menu.
■ Press the SOURCE button on the TV remote control and select a device other than
devices.
■ Press any of CH , CH LIST , PRE-CH , and FAV.CH to change to the TV mode. (Note that
the channel button operates only when an device with a built-in tuner is not
connected.)
The Connecting to device
…message appears on the screen.
■ You cannot use the remote control when you are configuring or switching to a
view mode.
■ Use the remote control when the setting or switching to view mode is complete.
The Anynet
+
device does not play. You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
■ Check whether or not the device supports functions.
■ Check whether or not the HDMI 1.3 cable is properly connected.
■ Check whether < (HDMI-CEC)> is set to <On> in the setup menu.
■ Search devices again.
■ You can connect an device using the HDMI 1.3 cable only. Some HDMI cables
may not support functions.
The TV program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output through
the receiver.
Connect the optical cable between TV and the receiver.
Device List
Record
Timer Recording
Receiver Off
Headset Connection
Picture Setting
Sound Setting
Sleep Timer Off
▼
Move Enter
BP68-00628B-00Eng_5.indd 84 2007-03-02 ｿﾀﾈﾄ 4:26:21