Samsung DV210AEW, Руководство по обслуживанию

Страница: 3 / 76

Safety Instructions _ 1
1. SAFETY INSTRuCTIONS
1-1. CAuTION FOR SAFETY DuRING SERVICING
1. Do not allow the customer to repair the product.
4
The person may be injured or the product life may be shortened.
2. Execute A/S after unplugging the power supply unit.
4
Be careful of the electric shocks.
3. Do not plug several plugs in the same outlet.
4
It may cause a fire due to overheat.
4. Check for damage, pinching or burning of the power plug the outlet.
4
Replace it promptly if it has a problem.(It may cause the electric shocks or fire)
5. Do not clean the main body with water.
4
It may cause electric shocks and fire and shorten the product life)
6. The wiring harness shall be free from moisture and tightened during serving.
4
It shall not be deviated by certain impact.
7. Remove any dust or dirt on the housing section,wiring section,connection section during servicing.
4
Protect from possible cause of fire such as the tracking,shortage etc.
8. Check for any marks of moisture on the electrical parts, harness section etc.
4
Replace the parts or remove the moisture.
9. Check the assembly status of the parts after servicing.
4
Maintain the status before servicing.
10. Pull out the power cord by holding the plug.
4
Be careful of electric shocks and when the cord is damaged.
11. Unplug the power plug from the outlet when the dryer is not used.
4
Be careful of electric shocks and fire due to the strike of lightning.
12. Do not use or store sprays or flammable materials(including gasoline,alcohol etc.) around the dryer.
4
Be careful of explosions or fire due to electric sparks.
13. Do not put bowls of water or wet laundry on the dryer.
4
If water has penetrated into the dryer, this may cause electric shocks or fire.
14. Do not install the dryer outside exposed to moisture.
4
It may cause electric shocks and fire and shorten the product life.
15. Do not push the control buttons with an awl,pin, or sharp materials.
4
It may cause electric shocks and damage.
16. Check the dryer is leveled horizontally and installed properly on the floor.
4
The vibration may shorten the product life.